Extracts from the Guidelines for the Evaluation of Automotive Power Battery Industry (2017)

Extracts from the Guidelines for the Evaluation of Automotive Power Battery Industry (2017)

Basic requirements of enterprises
Established in accordance with national laws and regulations, in line with the requirements of the development policy of the automobile industry, with independent legal personality, obtained the business license of enterprise legal person issued by the administrative department for industry and commerce.
In line with national laws, regulations, etc. on safety production, environmental protection, energy conservation, fire protection, etc., it has established safety production, environmental protection plan mechanism and energy conservation management system, through environmental management, occupational health, and safe production. Evaluate or accredit, and have a complete fire safety monitoring and disposal system.
The legal land use right of the land for production sites, the area of ??production land and the factory buildings should be compatible with the varieties and scale of products produced by the enterprise.
Less than 10 GWh. The annual production capacity of the system enterprise is not less than 80,000 sets or 4 billion watt hours. Production of various types of power battery batterys enterprises, system enterprises, their annual production capacity must meet the above requirements.
Enterprises should formulate enterprise standards that are not lower than national or industry standards in terms of safety, consistency, and cycle life of power battery products, and implement them.
There has been no major safety accidents in production, operation and product application in the past two years.
Production conditions requirements
Enterprises should have production equipment, facilities and their ownership in line with the variety and scale of products produced.
Monolithic enterprises should have production equipment and facilities for electrode preparation, battery assembly, chemical conversion and other processes, as well as production environment monitoring systems and corresponding equipment and facilities for real-time monitoring of temperature, humidity and cleanliness of production workshops.
The system enterprise should have a power battery system assembly line suitable for mass production.
Monomer enterprises should have at least automated production capacity and on-line inspection capabilities for key processes such as electrode preparation, lamination/winding, assembly, injection, and formation/division.
The system enterprise should have at least automated production and on-line inspection capabilities for key processes such as inspection, soldering or connection, assembly, and off-line testing of batteries or modules.
The enterprise should have a standardized process flow, and establish a complete monitoring system from raw materials, semi-finished products, process parameters of the production process, product delivery, etc., with product consistency assurance capabilities such as process precision control.
The enterprise shall monitor and discharge the wastewater and waste gas generated during the production process, and supervise and manage the disposal and recycling of waste. All kinds of emissions should meet the requirements of GB30484 "Battery Industry Pollutant Emission Standards" and other national and industrial standards and relevant laws and regulations.
Technical Capability Requirements
Enterprises should establish product design and development institutions with corresponding research and development personnel, which account for not less than 10% of the total number of employees or not less than 100. Research and development personnel should at least cover new product technology research and development, material analysis and evaluation, new process tooling development, product trial and test analysis, enterprise standard revision, patent tracking and application.
Enterprises should establish product design and development processes and technical management systems that are compatible with automotive R\u0026D, establish automotive power battery product design specifications, establish product development information databases, and should have the following research and development capabilities:
It has the ability to design and develop production process and product (including material products) test and verification of single power battery, and has the ability to verify and analyze key performances such as safety and consistency of single power battery.
The system enterprise should have the ability of power battery series and parallel connection and structure, auxiliary equipment, carrier structure, management system, thermal management system design and development and test verification, and has system and key components safety and consistency. Verification and analysis capabilities for key functions and performance such as reliability.

Extracts from the Guidelines for the Evaluation of Automotive Power Battery Industry (2017)_no.95

The company shall be equipped with relevant development tools, software, R\u0026D and test verification equipment, and trial production equipment (including pilot lines) that satisfy at least the above materials analysis, R\u0026D trial production, safety evaluation, performance evaluation, etc.
The enterprise should have a complete product development experience and have the ability to continuously invest in product development.
Product Requirements
The power battery products should meet the requirements of current national standards and industry standards, and pass the qualified automotive power battery related testing institutions.

Extracts from the Guidelines for the Evaluation of Automotive Power Battery Industry (2017)_no.1206

Products developed by the company shall comply with the legal provisions on intellectual property protection.
Quality Assurance Ability Requirements
Enterprises should adopt TS16949 quality system certification to prepare and implement production consistency control plans.
The enterprise shall establish a complete inspection system and traceability system from raw material storage, semi-finished product inspection, finished product delivery, and implement computerized information production management.
After-sales service capability requirements
Enterprises should establish a perfect after-sales service system and have the quality assurance capability of after-sales service. It should have the ability to respond quickly to power battery faults, as well as power battery usage, faults, and summary analysis of major problems.
Enterprises should meet national and local policies and regulations related to the recycling of power battery products.

Declaration
From: Sunbright Power Co., Limited
Here, we declare all the emails from Sunbright Power are with the suffix @sbb-battery.com. Please be careful when it is different, especially about the bank information. Any doubts please call us directly. Make sure all the businesses are safe. Thanks